The saw is running (still turning) once it is back in its home position (DELUXE)
Possible cause Possible solution
Engine does not start
Check whether the diesel pump has fuel or air in the system. Inspect the diesel pump. Check whether the diesel filter element contains water or is clogged.
The saw does not cut the wood but the chain turns
Possible cause Possible solution
Engine overheating
Clean the radiator and check for lack of coolant/antifreeze. Check whether the thermostat opens properly. Check the fan belt.
The chain does not turn
Possible causes Possible solutions
The splitting cylinder lacks force
Possible cause Possible solution
The sawmill does not start automatically when the saw is raised
Possible cause Possible solution
Changing hydraulic input controls
Swap the hoses to change which hydraulic arm is controlled. To change the direction/function of an arm, you must reverse the quick-connect couplers.
Is it normal that my splitter does not return automatically?
No, this is not normal. There may be an issue with the actuator cable.
Log moves while being milled
Cause: Solution:✓ Reduce dog pressure