The saw does not cut the wood and the chain does not turn
Possible cause Possible solution
Nothing works anymore and the engine will not start
Possible cause Possible solution
The saw is running (still turning) once it is back in its home position (DELUXE)
Possible cause Possible solution
The saw does not cut the wood but the chain turns
Possible cause Possible solution
The chain does not turn
Possible causes Possible solutions
The splitting cylinder lacks force
Possible cause Possible solution
The sawmill does not start automatically when the saw is raised
Possible cause Possible solution
Changing hydraulic input controls
Swap the hoses to change which hydraulic arm is controlled. To change the direction/function of an arm, you must reverse the quick-connect couplers.
What should I do when my saw is not spinning fast enough / not spinning at all?
Check that the saw valve is engaging properly – replace if needed. Check that the safety valve opens and closes correctly – replace if needed.
What should I check if the splitter has no pressure?
Check that the saw valve is engaging properly – replace if needed. Check that the safety valve opens and closes correctly – replace if needed. Check the splitter relief valve and adjust the pressure as needed.